|
Revision 249, 0.9 KB
(checked in by kleinjt, 3 years ago)
|
|
Added draft gerber files for legacy mcc board, and eagle .cam file according to the rose-hulman fab specifications.
|
| Line | |
|---|
| 1 | Generated by EAGLE CAM Processor 5.2.0 |
|---|
| 2 | |
|---|
| 3 | Drill Station Info File: C:/Documents and Settings/Jon/Desktop/robotics/mcc/legacy_controller/mcc.dri |
|---|
| 4 | |
|---|
| 5 | Date : 10/20/2008 2:59:40 PM |
|---|
| 6 | Drills : generated |
|---|
| 7 | Device : Excellon drill station |
|---|
| 8 | |
|---|
| 9 | Parameter settings: |
|---|
| 10 | |
|---|
| 11 | Tolerance Drill + : 0.00 % |
|---|
| 12 | Tolerance Drill - : 0.00 % |
|---|
| 13 | Rotate : no |
|---|
| 14 | Mirror : yes |
|---|
| 15 | Optimize : yes |
|---|
| 16 | Auto fit : yes |
|---|
| 17 | OffsetX : 0inch |
|---|
| 18 | OffsetY : 0inch |
|---|
| 19 | Layers : Drills Holes |
|---|
| 20 | |
|---|
| 21 | Drill File Info: |
|---|
| 22 | |
|---|
| 23 | Data Mode : Absolute |
|---|
| 24 | Units : 1/10000 Inch |
|---|
| 25 | |
|---|
| 26 | Drills used: |
|---|
| 27 | |
|---|
| 28 | Code Size used |
|---|
| 29 | |
|---|
| 30 | T01 0.0320inch 88 |
|---|
| 31 | T02 0.0394inch 3 |
|---|
| 32 | T03 0.0400inch 49 |
|---|
| 33 | T04 0.1300inch 2 |
|---|
| 34 | |
|---|
| 35 | Total number of drills: 142 |
|---|
| 36 | |
|---|
| 37 | Plotfiles: |
|---|
| 38 | |
|---|
| 39 | C:/Documents and Settings/Jon/Desktop/robotics/mcc/legacy_controller/mcc.DRD |
|---|
